Ihr Warenkorb ist leer
Ihr Warenkorb ist leerAqara Tür- und Fenstersensor P2 (Thread)
Oleg
Bewertet in Deutschland am 16. Februar 2025
Bis jetzt läuft alles 1AKorektur. Nach nicht mal 1 Monat ist die Batterie schon alle und dieses Kleber was dran ist das fällt nicht mehr.
ismailbabelli
Bewertet in Saudi-Arabien am 4. Juli 2024
استخدمته للباب الخارجي تحت شمس الرياض في الصيفحتى الان شغال بشكل جيد لأكثر من شهرقبله استخدمت حساس سون اوف لكنه لم يتحمل الحر
Daz
Bewertet in Australien am 26. September 2024
The sensor works as described, however the magnets in the main unit are so strong that they keep pulling the small magnet off the sticking substrate. I have two of these and the one I was to tell if the fridge door is open continuously pulls the smaller magnet from the door. I will look at some different sticking mechanism, otherwise the sensor part works just fine. I have used with matter on my Homey Pro - no issues
Emin
Bewertet in der Türkei am 12. November 2024
Aqara’nın bir çok ürününü kullanıyorum. Aynı ve kalite ve tutarlılığı bu üründe de var zannederek 5 adet satın aldım. Sonuç tam bir fiyasko.1. Cihaz kendini belirli bir süre sonra (10-15dk) kapatıyor ve bırak pencereyi açmayı ev yıkılsa yerle bir olsa tepki vermiyor.2. Cihazı kurmak tam bir işkence. Mater’a tanıt sonra Apple HomeKit’e tanıt. Bağlanıyor diyor 10 dakika bekletiyor. Bağlantıyı bir şekilde sağlıyor ama Aqara App’in açık dediği yerde HomeKit kapalı diyor ya da tam tersi. Tutarlılık yok.Not: Belki cihaz bozuktur diye diğer kutudaki ürünü denedim sonuç aynı.Özet: Aqara’ya yakışmadı. Almayın, pişman olmayın.
محمد
Bewertet in Saudi-Arabien am 12. Mai 2024
شريت المنتج بسبب دعمة ميزة matterمباشرة قدرت افعله على Smart Things في جوال جالكسي بالباركود الموجود وفي ثواني شبكممتاز وسريع الاستجابة
Josh Blake
Bewertet in Australien am 8. November 2023
Using this new sensor directly with Home Assistant and a SkyConnect device running multiprotocol firmware. Pleasantly surprised to see Matter over Thread on a sensor like this. Note you do NOT need the Aqara hub to get this device up and running. Repeatable open/closed status with instant updating in Home Assistant. Battery life is also reported / indicated. The appearance of the device is also clean; pill-shaped and standard white. The labels easily peel off the device for a less conspicuous appearance, although the Matter pairing code is etched in the plastic for safe keeping. It comes with a spare set of adhesive backings. Device setup is straight forward, and I recommend placing the magnet first (the smaller of the two pills) and then placing your sensor by using your smart home setup in order to determine the optimal placement for accurate tracking.
Produktempfehlungen