Warenkorb

Ihr Warenkorb ist leer

Ihr Warenkorb ist leer

DAOKAI XH-M131 Fotowiderstandsrelaismodul 12V DC Fotowiderstands-Relaismodul Lichtsteuerungsschalter Erkennungssensor Automatischer Lichtsteuerungsschalter mit 24 AWG-Draht(5 STÜCKE)

Kostenloser Versand ab 25.99€

10.99€

5 .99 5.99€

Auf Lager

Info zu diesem Artikel

  • Beschreibung der Potentiometeranzeige Rotes Licht: Modulbetriebsspannung, blaues Licht: Relaisbetriebsanzeige, Potentiometer: Erkennungshelligkeitswert anpassen.
  • Funktion Das Fotowiderstandsmodul reagiert am empfindlichsten auf die Helligkeit des Umgebungslichts und wird im Allgemeinen verwendet, um die Helligkeitsänderung des Umgebungslichts zu erkennen.
  • Gemeinsamer Anschluss, normalerweise offen, normalerweise geschlossen Die drei Ports entsprechen einem Doppelsteuerungsschalter. Wenn die Relaisspule mit Strom versorgt wird, ist der gemeinsame Anschluss mit dem normalerweise offenen Anschluss verbunden, und wenn kein Strom vorhanden ist, ist der gemeinsame Anschluss mit dem normalerweise geschlossenen Anschluss verbunden.
  • Empfindlichkeitseinstellung Stellen Sie die Startrelaisschwelle ein, indem Sie das Potentiometer einstellen. Wenn das Licht bei dieser Schwelle dunkel ist, wird das Relais des Moduls angezogen, und wenn es bei dieser Schwelle hell ist, wird das Relais getrennt.
  • Paket beinhaltet Sie erhalten 5 x 12 V Fotowiderstands-Relaismodul, 2 x 50 cm / 19,68 Zoll 24 AWG-Kabel.


Parameters:
Operating voltage: 12V
Output type: Output switch
Control capacity: maximum 10A
Detection frequency: 1MHZ
Load capacity: 10A / AC 250V or DC up to 30V
RED LED ON: Indicate the Power ON
BLUE LED ON: Relay is working
Size: 53x31x19mm/2.08x1.18x0.75in
Working temperature: -20 ° C ~ +85 ° C

Descriptioin:
1. The module adopts 12V power supply and has the function of anti-reverse connection, and the reverse connection of the power supply will not damage the module;
2. The maximum load capacity of the normally open interface: AC 0V--125V/20A, DC 0V--14V/20A; the module output has three ports common terminal (COM), normally open (CK), normally closed (CB), three Each port is equivalent to a dual-control switch. When the relay coil is powered, the common terminal is connected to the normally open terminal, and when there is no power, the common terminal is connected to the normally closed terminal; the COM terminal is generally connected to the negative pole of the power supply through the load, and the normally open terminal is connected to the positive pole of the power supply ;
3. The sensitivity can be adjusted by the potentiometer. By adjusting the potentiometer, the threshold value of the start relay can be set. When the light is dark at this threshold value, the module relay is pulled in, and when it is bright at this threshold value, the relay is disconnected

Package includes:
5x12V Photoresistor Module
2x50cm/19.68inch 24AWG Cable


Mihai Petrovici
Bewertet in Deutschland am 9. Juni 2024
Cheap ldr sensor for light,i haven't put in operation yet.
Produktempfehlungen

64.95€

28 .99 28.99€

4.8
Option wählen

28.15€

11 .99 11.99€

4.3
Option wählen

10.42€

4 .99 4.99€

4.3
Option wählen

46.95€

21 .99 21.99€

4.4
Option wählen

19.90€

8 .99 8.99€

4.8
Option wählen

11.26€

4 .99 4.99€

4.5
Option wählen

57.60€

26 .99 26.99€

4.3
Option wählen