I am very happy with the purchase. It is made with good quality materials and should last the lifetime of the generator. Easier than expected to assemble and excellent instructions. The only thing that I found to maybe be a future issue are the attaching straps (2 per attachment point) used to support the cover to the frame. They may continue to work well. If not zip ties later on might be needed.The impressive thing to me was GenArmor contacting me to make sure that I ordered the right cover for my specific generator before sending it out. That has never happened to me before. Kudos to them!!

I am very impressed with the quality of this cover. It's very well made and you can tell by the weight of it as well as the stitching. I don't imagine this thing coming apart with wear and tear anytime soon. I'd imagine it fits most average size generators, but maybe double check the size before you order it. All four sides come down! Great product.

We lose the power at our house probably a couple of times per year on average. On some occasions, it has been for multiple days, so a generator is a necessity to keep the basics running in the house. And of course, if the power is out, likely it’s because of bad weather which is not the best conditions for running a generator outdoors. My hope is that this GenArmor Generator Cover will solve that problem.The package comes with all the hardware and covers to complete the assembly. As well it has a small hex wrench, and a screwdriver included which are the only tools you need to complete assembly. The instructions are significantly better than average with large photos and good explanatory text.I have a 4000/3000 Champion generator which is a bit older (probably around 10 years) and that particular model was not shown on the Amazon listing. It did mention that other Champion generators need an optional height bracket for installation. That was NOT the case with my installation though see the note below on the handle (and the photo).Installation was pretty straightforward given the good instructions. I only had two very minor issues. The anti-vibration pads didn’t all stick properly to the round frame of my generator though at least in one case that might have been because of dust on the frame. Either way, it was easy to just wrap some electrical tape around them and the problem was instantly solved. Initially I had some minor issues with the hole alignment in putting the side panels in place but by the time I had almost completed the job I was able to go back to the problem hole and it aligned quite easily. I think the entire process only took around 15 minutes or so.A nice touch is that they do includes some extra nuts, bolts and washers.My generator has a handle that attaches to the frame and initially I thought I would not be able to use it. There is a reference to installation with a handle for an entirely different brand of generator in the owner’s manual which involves buying brackets to raise the frame height. I did eventually find that I can install the handle if the top panel is removed (which is just held on by Velcro) so that will work fine to take the unit in and out of my garage. See attached photo.My only other comment (which does not affect my rating) is that since my generator is on the small size, the frame adds quite a bit of width to the overall unit when installed. Where I have it stored in my garage doesn’t have all that much space so I can’t wheel it in and out with the frame in place. Luckily, the design is such that the frame is held to the generator with Velcro straps, so my solution was simply to undo the four straps and lift the entire cover off to put the generator in its storage location. I mention this in case others have space issues and are considering purchasing this cover.Overall, this seems like a heavy duty cover that will protect the generator when it is used outside during inclement weather.

I installed this on a Firman trifuel 10000 watt generator and it fit perfectly! Very happy. Great product, well designed, excellent material and great instructions. Pleas add this generator to the list of compatible generators

After my IGAN Generator cover fell apart in two years, and company not honoring their 3 year warranty, I gave these folks a try. We will see in time how this stands the sun and rain:- Design is superior. You can install middle rods both ways so it fit my Champion 100520 perfect without any modifications- Frame quality is superior. Instead of cheesy plastic brackets and thin round rods, they have solid square rods and metal brackets. The side canopy is installed using the provided screws/washers and aligns perfect. Top sits on with Velcro bands. The hanger hooks are also superior.- Instructions are given for two different assembly types, and perfect to understand. There are also spare assembly hardware and tools required. It took 10 minutes to put this onOnly problem is that when it rains, the top canopy will puddle around 5-6 mm of water because of how side stitches done and no slots left for discharge. It needs improvement because puddled water there will intrude down through the stitches to the generator. A 2nd cheaper cover will be required to cover this when the generator is not in use.