Für den Preis wird eine angemessene Leistung geboten.

Für mich als Hobbyschrauber an KFZ bin mit dem Messgerät vollsten zufrieden!!! Die Ruhestrommessung und Fehlerbehebung wurde mit der Stromzange gelöst!!!! Für mich ein TOP Gerät auf das ich nicht mehr verzichten möchte!!!!

Klar nicht ganz so genau, aber für meine Zwecke, meist PV, ist das Gerät sehr gut👍

Ka he estado usando para mí trabajo y sinceramente tanto la resistencia, presicion y funciones que tiene la pinza es bastante sobresaliente por el precio sin mencionar su capacidad de medir hasta 1000A de CA y CC

A nice clamp meter, but not suitable for low currents.

Habe alle Messungen auch mit einem normalen Messgerät geprüft. Keine Abweichungen, kann ich nur empfehlen.Qualität sehr hochwertig.

Sehr Hochwertiges Gerät, einfach zu bedienen, würde ich jederzeit wieder kaufen

Macht einen guten Eindruck. Verarbeitung sehr schön und hochwertig. Großer Funktionsumfang für den Preis.

I was looking for a honest and reliable clamp meter. After watching many detailed reviews I have decided to buy this one. Very good quality, measurements are within spec range, not exactly a fan of AAA batteries but they seem to last a while. Screen looks very nice, unfortunately can be hard to read outdoors in sunny conditions. I'm very satisfied with my new toy 🙂

I own both the HT208D and the HT208F. Both are a great value with a great many useful functions. I originally bought the D model because I wanted to measure the peak inrush current on our RV AC when I was debugging what turned out to be an on board generator problem. Even though I have a lot of good meters at home, none had inrush capability. The D performed very admirably, but as mentioned by many others, the display can be difficult to see in bright sunlight. Still, I liked the meter so much that I wanted a second one. That's where the F model (HT208F) comes in: It's not immediately apparent, but the F is identical to the D except that it has a standard (backlit) LCD display that is visible in bright sunlight. So if this is a concern for you, get the F model. It's a quality meter with features for most everyone.

Im Vergleich zu meinen erheblich teureren Gossen Meßgeräte deckungsgleiche Messwert und sichere Bedienung. Ideal für den Werkzeugkoffer und robuste Handhabung. Bei Verlust oder Absturz schneidet das nicht so in das Portemonnaie. Sehr empfehlenswert und ausgezeichnet ablesbar.

This Kaiweets HT208D clamp meter is extremely SOLID. And extremely good value. The dial works well. The display is fantastic. The meter has very good features for AC and DC and it wasn't too bad to learn how to use it for a non-electrician. While the In Rush function is supposed to be for AC current only, I've seen YouTube reviewers say it also works for DC current, though this is not in the user manual.A Tip: To best use the InRush function, also buy an AC Line Splitter to use for measuring appliance/motor InRush current, as otherwise, you would need to split the cable to be measured, as the clamp is supposed to ONLY go around 1 wire, the hot wire and not 2 or 3 wires as in Hot, Neutral and Ground together. Kaiweets does not seem to sell an AC line splitter, which IMO they should. Klein has a nice small one but it has no price on the Amazon.ca site. The dual position line splitters can be unwieldy to use in some outlets, as it falls out due to being long and then having the appliance plugged in to the far end, while the Klein line splitter is smaller, grounded and is less prone to fall out of the outlet. Using a line splitter means you still only measure the hot wire and so you do not have to cut into and damage your cable to get at the single hot line/wire.Measuring AC and DC current with the clamp is a breeze and voltages with the beefy but soft and pliable and very good silicone wire and probes makes it a great multi use meter and especially so for solar and off grid use. The clamp easily fits around 4/0 cable and accurately measured DC Current, as well as AC Current. Measuring appliance or motor AC InRush is a HUGE help as not all off grid inverters, especially low cost High Frequency inverters that don't use big heavy transformers, can handle high inrush currents and the inverter sellers and some manufacturers don't tell you this and over hype their inferior products. This meter will tell you what the appliance / motor inrush current is so you can ask the inverter manufacturer if the info is not in the specs.The 2 cons for some may be that the display is apparently difficult to read in bright light outdoors and the flashlight is blocked by the clamps so isn't all that useful. Oh and it has a useful NCV function via the clamp sensor that works well though and reports on the display, by sound and by a Red or Green LED. As well, there are 2 pots inside that can be used to calibrate voltage readings to fine to meter. It also displays an ambient temperature reading in the display in some modes, as well as coming with 2 temperature probes. As well, it has a very good warranty.While I had a decent Klein multimeter already, I waited a long time for this Kaiweets to go on a the best sale price I'd seen and then decided to get it for the AC InRush function and the DC Clamp function for my off grid solar needs. Not sure how much I'll use the Klein now, although Klein I have, is not a clamp meter and has fewer functions but is much smaller than the Kaiweets HT208D.The Kaiweet HT208D goes on sale occasionally and when it does, don't sit on the fence, as that makes it an even better value. HIGHLY RECOMMENDED.

ACだけでなくDC電流も測れ、液晶が見易い！と思ったのもつかの間.....取説も数カ国有る中の日本語ではなく、日本語のみの取説で解説は十分だと思われたが...表示する数値が安定しない?!DC電流をクランプにて計測しようにも、ケーブルをクランプ前から乱れた数値を表示し、ゼロセットを押しても一瞬はゼロを表示するがその後ゼロを維持せずに乱れた数字を刻む？!...DC電圧計測でも測る前から乱れた数値を表示する?!...オマケにテストリードの接触が悪い様だ...導通チェックもテストリードの接触不良なのか？先端を確実に接触させているにも関わらず音が安定しない...不良品なのか？私の使い方が悪いのか？安物テスターに多く見られる症状ばかりです...よく考えた末に、返品 返金手続きしようと思います。計測する前から乱れた数値表示や接触不良等、真面なクランプメーターではないと思います。