Ihr Warenkorb ist leer
Ihr Warenkorb ist leer PRODUKTSPEZIFIKATIONEN:
BEZEICHNUNG: 24V Universalnetzteil
EINGANGSSPANNUNG: 110V/220V ±1% (100-140V, 180-260V)
AUSGANGSSPANNUNG: DC24V 0-25A
AUSGANGSSTROM: 25 (A)
LEISTUNG: 600 W max
WIRKUNGSGRAD: >80 %
EINSTELLBARER AUSGANGSSPANNUNGSBEREICH: ±5 %
FREQUENZ: 50-60 Hz
LECKSTROM:
TEMPERATURKOEFFIZIENT: ±0,03 %/℃ (0~50℃)
ARBEITSTEMPERATUR UND LUFTFEUCHTIGKEIT: -10℃~+60℃, 20%~90%RH
SCHUTZ: Überlast, Überspannung, Überstrom, Kurzschlussschutz
Reset-Methode: Automatisches Zurücksetzen nach Stromausfall
BEMERKUNGEN: Die Lastleistung darf die Nennleistung nicht überschreiten
ANWENDUNGSBEREICH: LED-Beleuchtung, Zugangskontrolle, Überwachung, LED-Anzeige, 3D-Drucker usw.
LIEFERUMFANG: 1x Schaltnetzteil
Cliente
Bewertet in Spanien am 28. Februar 2025
La fuente vino en su caja, bien protegida en foam pero abollada, así que debió ser antes del embalado.Esto no es lo peor, pues no hubo problema en enderezar la tapa (internamente estaba perfecta). Sin embargo, la fuente tiene escrito que el ventilador se enciende y apaga de manera automática pero no es verdad. Siempre está encendido y, al abrirla (para enderezar la tapa) no encontré ninguna sonda de temperatura que permitiera el automatismo. De hecho en la placa los contactos donde debería ir el termistor (marcados como TH) no tenían nada y al lado había un puente donde debería ir seguramente la resistencia asociada al termistor. Por lo demás funciona correctamente. No la devolví porque ya había abierto la tapa.
Giovanni P
Bewertet in Italien am 20. Juli 2024
Funziona ed eroga 24 volt, ma il trimmer per regolare la tensione serve solo per diminuirla. Non va oltre i 24v nemmeno di un centesimo.
P.J. Denyer
Bewertet in Großbritannien am 26. Juli 2023
Bought for a 3D printer that was randomly erroring out during the heating cycle. This power supply is on paper seriously over the requirements for the application but at this price, and baring in mind that cheaper power supplies might not put out quite as much power as they're rated for it's worth building in the overhead. It's done an excellent in the role and prevented the errors so I've just bought a second one for another printer with the same problem.
a r p bialecki
Bewertet in Großbritannien am 23. Juli 2023
Using this on a laser cutter rebuild, bought this not needing so many amps but better to have more than less!!!
Jogi
Bewertet in Deutschland am 13. Mai 2023
Über die Preis Leistung kann man nicht klagen. Es funktioniert einwandfrei und das tut es auch jetzt noch und hab es fast jeden zweiten Tag in Gebrauch. Kann es nur weiterempfehlen für sein Geld bekommt man auch was dafür.
Produktempfehlungen