Warenkorb

Ihr Warenkorb ist leer

Ihr Warenkorb ist leer

Wechselstrom-Sensor SCT-013-000 Nicht-invasiver Split-Core-Stromwandler AC 100 A/50 mA + ADC-Konvertierungsplatine mit männlichem und weiblichem Dupont-Kabel, Audio-Buchse

Kostenloser Versand ab 25.99€

14.79€

7 .99 7.99€

Auf Lager

Info zu diesem Artikel

  • 🎖️【WAS ES MACHT】: Verwenden Sie diesen Split-Core-Stromsensor, um Ihren eigenen Energiemonitor zu bauen und so Ihren Stromverbrauch zu reduzieren, oder verwenden Sie ihn zum Aufbau eines Überstromschutzgeräts für eine Wechselstromlast.
  • 🎖️【SPEZIFIKATION】: Eingangsstrom: 0 ~ 100 A AC, Spannung: 1 V; Länge des Anschlusskabels: 1 m; zwei Ausgangsformen: Stromausgang oder Spannungsausgang (Bürdenwiderstand muss hinzugefügt werden); Kabelbuchse: 3,5 mm (z. B eine Kopfhörerbuchse).
  • 🎖️【Heimwerkergebrauch】: Dieser geteilte Stromwandler ist besonders für den Heimwerkergebrauch geeignet und mit für Arduino und für Raspberry Pi kompatibel.
  • 🎖️【SICHERHEITSINDEX】:Durchschlagsfestigkeit (zwischen Gehäuse und Ausgang) 6000 V AC/1 Min. Flammhemmende Eigenschaften entsprechen UL94-V0.
  • 🎖️【PRODUKTE ENTHALTEN】: 1 x SCT-013-000 100 A/50 mA Stromwandler; 1 x ADC-Modul; 1 x 10-poliger Header; 10 x männliches und weibliches Dupont-Kabel; 1 x dreiadriges Audio-Buchsenkabel.


The standard Φ3.5 three-core plug output, the current and voltage two kinds of output.Hanging installation, lead output.For AC motors, lighting equipment, air compressors and other current ,monitoring and protection.
Current Transformer Specification:
Model: SCT013-000
Material: Ferrite
Lead Wire Length: About 1m
Opening Size: 0.51 * 0.51inch / 13 x 13mm
Working temperature: -25℃~+60℃
Storage temperature: -30℃~+90℃
Working voltage: less than or equal to 660V
Frequency range: 50HZ-1KHZ
Dielectric strength: 3.5KV 50Hz 1min
Fire resistance property: UL94-V0
Standard: GB1208-2006
Turns Ratio: 1: 2000
Max Sampling Resistance: 10Ω
Linearity: less than or equal to 0.2%
Accuracy: ±1%
Dielectric strength: AC 6000V/1min
Mechanical strength: opening and closing times, no less than 1000 times(20℃).
ADC module Specification:
Resolution: 16 Bits
Programmable Sample Rate: 8 to 860 Samples/Second
Power Supply/Logic Levels: 2.0V to 5.5V
Low Current Consumption: Continuous Mode: Only 150µA Single-Shot Mode: Auto Shut-Down
Internal Low-Drift Voltage Reference
Internal Oscillator
Internal PGA: up to x16
I2C Interface: 4-Pin-Selectable Addresses
Four Single-Ended or 2 Differential Inputs
Programmable Comparator
Package Inlcudes:
1 x SCT-013-000 100A/50mA Current Transformer
1 x ADC module
1 x 10-pin header
10 x Male and female Dupont cable
1 x Three-wire core audio female cable


kendonagasaki
Bewertet in Großbritannien am 28. April 2025
Must admit I was dissatisfied with this kit, it doesn’t work as wiring diagram shows. The CT produces the correct A to mA ratio but it’s AC mA. The provided ADC converter reads a dc voltage and cannot read the ac millivolt reading dropped across the burden resistor as per diagram. The user of this kit will need to design their own circuit to convert AC mA to DC volts to supply the ADC.
Produktempfehlungen

14.99€

6 .99 6.99€

4.7
Option wählen

14.69€

6 .99 6.99€

4.6
Option wählen

28.00€

12 .99 12.99€

4.3
Option wählen