Ihr Warenkorb ist leer
Ihr Warenkorb ist leer Product description
Advantage
High resolution, can generate sine/triangle/square waveforms.
Frequency range: 1Hz-1MHz.
Adjustable frequency and amplitude.
Frequency adjustment features coarse tuning and fine tuning.
Wide power supply range, use 9-12V external power or 9V battery(NOT Included).
All are through hole components, easy for installation.
Specifications:
Amplitude: 0-3V at 9V DC Input
Distortion: Less than 1% (at 1KHz)
Flatness: +0.05dB 1Hz - 100kHz
Amplitude: 8V (no load) at 9V DC Input
Rise Time: Less than 50ns (at 1KHz)
Fall Time: Less than 30ns (at 1KHz)
Symmetry: Less than 5% (at 1KHz)
TRIANGLE WAVE:Amplitude: 0-3V at 9V DC Input
Linearity: Less than 1% (up to 100KHz) 10mA
Package Includes:
1 x XR2206 Signal Generator Kit
1 x DC male cable
Customer
Bewertet in Japan am 7. Dezember 2024
付属の英語の説明書は文字が滲んでいて、読みにくい状態でしたが、XR2206で検索して参考に組み立て、9Vで動作させました。ケースの組み立てが難しく、力を入れて組み立てようとしたところ、割れてしまったのが残念です。部品の不足もありました。
Richard, Leicester
Bewertet in Großbritannien am 6. Februar 2023
Great device for under a tenner. No proper instructions just a circuit diagram, parts list and vague information. Hard to read the instructions so I took pictures on my ipad and then zoomed in. Not really for the novice since you have to have some idea about circuit design. The board just fits in the plastic case, so the solder joints have to be within the mounting holes, not protruding like with a strip PCB. Once assembled the unit worked first time. The square wave is not really square, and sine wave is just the triangle wave with the peaks smoothed. Controls vary output voltage (I set it at 1 volt AC) and then two for frequency. The frequency range is set by the jumpers, so the controls provide coarse and fine tuning. As a signal generator it does the job with a very stable output and easily acts as an amplifier input for troubleshooting but otherwise don’t rely on it producing a perfect wave shape. Can also test audio amplifier transformers with it. Runs fine on a 9 VDC battery. So cheap and does the job and great for the hobbiest but not for professionals.
Roberto Piccione
Bewertet in Italien am 21. Februar 2023
Le manopole si bloccano sui potenziometri ed è impossibile toglierli senza fare danni.
Pralish
Bewertet in Großbritannien am 16. Juni 2023
The instructions were a little hard to follow with some parts of the acryllic casing seeming rather difficult to fit together (although I was worried of snapping it).Despite this, I still was able to assemble it. I tested the quality of the signals with my oscilloscopes - I was very impressed! Very cool device, and pretty accurate as well. I would recommend, although it might take a little longer to make:)
Krokodil
Bewertet in Deutschland am 11. September 2023
Der Funktionssignalgenerator ist völlig in Ornung und verwendbar. Der beigelegte "Zettel" mit der Schaltung und Stückliste ist eine Kopie einer Kopie einer Kopie einer Kopie............ und nicht zu entziffern.Leiterplatte ist von guter Qualität und sauber bedruckt. Mit Hilfe des Datenblatt vom XR2206 ist mir die Bestückung der Leiterplatte gelungen. Mit dem miesem Zettel ist es nicht für Einsteiger und nicht lösbar.
Marco
Bewertet in Italien am 23. Februar 2022
ottimo
Produktempfehlungen
54.23€
26 .99 € 26.99€