Ihr Warenkorb ist leer
Ihr Warenkorb ist leerMeisterBongo
Bewertet in Deutschland am 19. Mai 2025
Gutes Abdeckband. Klebt gut auf glatten Flächen (auch geschliffenem Holz) und lässt sich Rückstandfrei entfernen.
Engineer
Bewertet in Großbritannien am 24. April 2025
Simply the best. Sticky side goes on the build plate (believe it or not there are idiots that somehow use it upside down). Essential for preventing PETG ruining your build plates. It is preferable to use either glass, or the plain sheet steel side of your build plate with this.Clean both your glass / steel build plate before application, and the top of the tape after with 99% IPA and a microfibre cloth to remove fingerprint grease, and ensure a really good stick. Skip the 2nd IPA application and apply a thin film of Elmer's purple gluestick if you want to make print removal easier, or are having trouble getting PETG to stick.I tend to use the roll as a roller to make sure the tape is extra stuck. Get each strip really close together and cut off the excess.There's a misconception with the use of glue stick. Despite what people may tell you, it is both an adhesive and a stickiness regulator. A small film of it will help both make it easier to remove prints, and provide an adhesive surface for say, PETG. Too much and nothing will stick, too little and the PETG will go through the material, fusing to glass, PEI, PEY, PET etc. and sometimes, still not stick.A note to all those out there who want to protect their regular one-sided build plates from any oils that come out of your magnetic base when being put on upside down, I put some baking parchment / greaseproof paper between my S1 Plus' regular textured bed, and the magnetic base. Really helps.Universally, any problem you have with something not sticking, is the presence of oils and grease. IPA doesn't remove it, it just temporarily dissolves it until you manually remove it.For paint, yeh, it works. I use it for my cosplay but the edges don't come out too great. I'd recommend Frog Tape or Tamiya tape over this for delicate and detailed paint.
Macmalk
Bewertet in Deutschland am 9. Juni 2024
Perfect tape but sometimes leaves the blue residue on a metal surfaces. Hence 4 stars.
m.r.
Bewertet in Deutschland am 12. Juni 2023
Ich habe diesen Vorteilspack mit 6 Rollen zum Aktionspreis bestellt und nur eine Rolle erhalten. Ich dachte, dass das ein Versehen ist und schickte die eine Rolle mit dem Vermerk retour, dass eben nur eine Rolle anstatt der 6 Rollen geliefert wurde. Danach bestellte ich diesen Vorteilspack noch einmal und bekam wieder nur eine Rolle. Geht wieder retour.Da kann jemand wohl nicht bis sechs zählen! Ein Stern ist noch zuviel!!
Michele S.
Bewertet in Italien am 8. Juni 2022
Il prodotto è ottimo, aderisce bene e si stacca facilmente senza lasciare adesivo. Utilizzato sul parquet di un palestra
I. Unrein
Bewertet in Deutschland am 6. Juni 2022
Das Malerband ist sehr stabil. Es klebt nicht nur einmal. Man kann mehrfach ablösen und es klebt immer noch. sehr empfehlenswert.
JöRo
Bewertet in Deutschland am 16. Mai 2022
Für die Lackierung eines Bootes habe ich nach gutem Tape gesucht. Verwendet hatte ich es schon des öfteren und war bis jetzt eigentlich immer sehr zufrieden. Skeptisch war ich hier, weil insgesamt 7Schichten Farben (alle 2 Komponentig) aufgetragen wurden. Das Tape war etwa 1,5 Monate geklebt und es sind die 7 Schichten aufgetragen worden, ohne das Tape zwischenzeitlich zu erneuern. Nach den Anstriche ist das Tape ohne Probleme abzuziehen gewesen, die Lackkante war hervorragend. Ich werde nie wieder ein anderes benutzen. Gegenüber Baumarkt günstiger und von hervorragender Qualität. Der einzige Nachteil, es riecht etwas, wonach kann ich nicht beschreiben.
Francesco
Bewertet in Italien am 3. Juli 2021
Ottimo ! Usato per coprire delle travi di legno per una ristrutturazione mansarda. Dopo 2 mesi si può rimuovere senza aver rovinato il legno con residui di colla.
Cliente
Bewertet in Spanien am 25. Mai 2021
Calidad 3M. Poco más que decir. Buena adhesión, no deja restos de cola, líneas perfectas.Calidad precio de esta oferta increíble, pero el envío y la gestión de Amazon ha sido pésima. Me retrasaron el envío 3 veces y lo que iba a tardar un día luego fue una semana luego dos y acabó tardando más de un mes.5 estrellas al producto.0 Al envío y la gestión de Amazon.
Gaby Junker
Bewertet in Deutschland am 14. Dezember 2021
Gute Haftung an den Rahmenrändern von Holzmaltafeln, um diese beim Fluidpainting vor überlaufender Farbe zu schützen und beim anschließenden Versiegeln mit Resin/Epoxidharz einen klaren Kantenabschluß zu erhalten. Lässt sich nach Trocknung (grifftrocken reicht) gut vom Holzrahmen entfernen und sorgt somit für Bild mit sauberen Rahmen.
Tognarini Bastien
Bewertet in Frankreich am 13. Juli 2021
Bande de masquage très adhérente. Elle a juste retiré un peu la peinture de mes tours de porte en bois.La bande est facile a poser et est étanche au rouleau et les coulures de peinture, ce qui faisait franchement défaut sur pas mal d'autres marque
Nadine Schmeiser
Bewertet in Deutschland am 27. November 2020
Riecht zwar sehr stark chemisch. Die Qualität und Funktion ist trotzdem super. Vergleichbar mit der Qualität des Tesa-Profi Malerband. Rückstandslos zu entfernen, getestet über 4 Wochen.
Losthighway
Bewertet in Deutschland am 18. Mai 2020
Benutze das Bluetape für PETG und ASA auf meinem Artillery Sidewinder, die Teile haften teilweise sehr stark, endlich optimale Haftung, kein Warping. Um 20€ für 6 Rollen ist der Preis zudem unschlagbar, eventuell ein Preisfehler seitens Amazon.
Produktempfehlungen