Cinders
Bewertet in Deutschland am 6. Juli 2024
I bought the various models to try and they all work superbly well. Had to leave plants for 10 days in Scotland and they all survived thanks to BLUMAT adapters!
F. Hagmann
Bewertet in Deutschland am 20. Juni 2024
Eine 1,5-Liter-Flasche hält 3 Tage. Ob das als Bewässerung in einem größeren Topf reicht kann ich nicht ermessen. Mein Topfdurchmesser hatte 25 cm. Da hatte ein Bewässerungsadapter gereicht.
paolasql
Bewertet in Italien am 16. Juni 2024
Coni in materiale naturale (no plastica) senza nessun scendi goccia, che dopo qualche tempo si otturano i fori. Semplice, economico, ottimo. In base alla pianta e per quanto sei assente decidi la grandezza della bottiglia da inserire. Altro non devi fare. Perfetto.
Toobbi
Bewertet in Deutschland am 13. Juni 2024
Der Blumat 22202 ist ein hochwertiges Bewässerungssystem, das durch seine einfache und effiziente Funktionsweise besticht. Es reguliert die Bewässerung Ihrer Pflanzen automatisch und basierend auf deren Bedürfnissen, ohne dass ständige manuelle Eingriffe erforderlich sind. Die Installation ist unkompliziert und das System arbeitet zuverlässig, was es besonders für Hobbygärtner und Profis gleichermaßen empfehlenswert macht.
refaesch
Bewertet in Deutschland am 1. August 2024
Wir hatten gehofft, unsere Pflanzkübel und Hängeampeln der Südwestterrasse während 1-wöchiger Abwesenheit über die Flaschenadapter ohne großen Aufwand mit Wasser versorgen zu können. Unsere Pflanzgefäße sind mit 25-32 cm Durchmesser deutlich kleiner als die in den Abbildungen der Artikelbeschreibung.Zum Glück haben wir vorher getestet, ob die Alleinbewässerung mit Blumat Flaschenadaptern in der Praxis funktioniert: die Pflanzen hätten es wohl kaum überlebt!Während des Testzeitraums war es überwiegend sonnig, jedoch nicht allzu heiß (bis 26°C) und die Pflanzenerde war vorher gut durchfeuchtet. Die vorgewässerten Tonkegel haben wir mit aufgesteckten 1,5 l Flaschen ziemlich tief in die Erde eingedrückt, ober durch ein 2 cm Loch befüllt und tägliche Feuchtemessungen im Erdbereich durchgeführt. Je nach Bepflanzung hielt der Flascheninhalt 3-4 Tage und musste dann nachgefüllt werden. Die Randbereiche der Wurzelballen trockneten zunehmend und waren nach einigen Tagen völlig ausgetrocknet, so dass am Rand breite Lücken entstanden. Mehrere Blühpflanzen zeigten ab dem 4. Tag deutliche Anzeichen von Wassermangel, so dass wir den Test nach 5 Tagen beendet haben und wieder auf klassische Gießkannenbewässerung umgestiegen sind.Sicherlich könnte man pro Pflanzgefäß mehrere Blumat-Adapter einsetzen, aber bei 8-10 Gefäßen ist das ein ziemlicher Aufwand, nicht nur kostenmäßig.Wir haben jetzt wieder einen Nachbarn mit dem Gießen unserer Pflanzen beauftragt - das ist sicherer...
Andrea N.
Bewertet in Deutschland am 28. Juni 2023
Der Adapter hat bislang auf viele handelsübliche Flaschen gepasst.Das Loch oben habe ich so groß geschnitten, dass ich die Flasche seitlich mit dem Wasserschlauch befüllen kann.Anfangs habe ich die Kegel vor der ersten Nutzung gewässert, aber ich denke, dass das beim Flaschensystem nicht nötig ist.
Dee
Bewertet in den USA am27. Mai 2023
I was very skeptical at first but these really do work IF you pierce the bottle with a TINY TINY TINY hole. I have a very large plant and needed it to be adequately watered for a week while I was on vacation. At first, I made the hole in my bottle big enough for a straw and all the water very quickly emptied out within an hour. On my next attempt, I first watered my plant thoroughly and then placed the blumat bottle adapter into the plant using a large two liter soda bottle but this time I pierced the bottom of the bottle in three different spots using the tip of a safety pin!At first no water was draining into the plant but I realized that was because I had watered the plant first, so this adapter really does adjust the water flow based on the hydration need of the soil. The two liter bottle lasted for a week and my plant was very healthy and in great shape when I returned from vacation. The secret is to put just a TINY hole or two or three, depending on the size of your bottle. I use these in my plant all the time now so I don't need to worry about watering. I highly recommend this product!
Dana
Bewertet in Deutschland am 20. September 2023
Habe jeweils eine Flasche angesetzt, wie beschrieben. In echt wenig Zeit war diese leer. Selbst eine 1,5 Liter Flasche war in weniger als einem Tag leer. Ich hatte gehofft, es würde zwei Tage reichen, um so ein Wochenende abzufedern. Schade.
Cliente
Bewertet in Spanien am 9. September 2020
El producto se corresponde con lo anunciado. Mantiene una maceta grande húmeda una semana.
kassor
Bewertet in Deutschland am 30. Januar 2018
Ich habe inzwischen glaub ich zehn oder noch mehr von den Dingern. Passen prima auf die 1,75l Wasserflaschen und geben das Wasser wirklich nach Bedarf an die Pflanzen ab. Das hält je nach Temperatur und Trockenheit bis drei, vier Wochen. Wenn es ganz heiß ist, auch mal nur zwei Wochen. Inzwischen nutze ich die nicht nur für die Urlaubszeit, sondern als Dauerlösung.
Kheops777
Bewertet in Frankreich am 21. Juni 2018
Cet adaptateur bien pratique donne de l'eau au plantes en continu et de façon parcimonieuse. De plus, aucun gaspillage, je réutilise mes bouteilles plastique. Dommage que la partie plastique ne soit pas plus solide.
Alana
Bewertet in Großbritannien am 22. August 2017
OK, I went thru several of these products before the penny dropped, so I'm going to post my conclusions on all 3 products tried. I'm going to review the large Blumat (0.3l/day), the small Blumat (0.2l/day) and the long terracotta water spikes, for example the Warkhome Water Spikes.As you read other people's reviews, you will get confused. Some people will love a product, while others will say "useless; didn't work for me". Normally you can dismiss the odd 1 star review, but in this case the reviews are so conflicting, you can't come to any conclusion. The reason is that there are totally different use cases being considered.Use Case 1 is individual indoor pot plants, where you put one waterer next to ONE plant to directly feed its roots. Use Case 2 is outdoor plants, and plants in large enclosures, where you put one waterer in an area to feed a FEW nearby plants. For indoor and single plants, you may get away with a low flow rate of under .1 litre/day, which is about what the Warkhome units provide. But if the plants are outside and getting the soil blasted with solar energy, you will need .2 or .3 litre/day. (And if you live in Arizona, you should be grateful that anything can survive that sunshine while you are there, and not expect any of these to work while you go on holiday for a week!).There are 2 different principles of watering being used here. The Warkhome type terracotta spikes are porous pot, with flow limited by the rate at which air can seep up into the bottle and relieve the partial vacuum formed at the top of the bottle. Without air getting into the bottle, the water can't seep out. The bottle fits into the neck of the spike roughly enough to make a partial seal, which is enough to limit the flows of air and water, hence the slow flow rate.The Blumat is totally different. Here the pot is fitted with a plastic neck, so that it completely seals with the inserted water bottle. Then how can the water get out you ask? Well, you have to puncture a hole in the top of the bottle, then it seeps out at .2 or .3 litres/day. (If you puncture a hole in a Warkhome bottle, all the water will just gush out in a few seconds!).I recommend to buy GREEN plastic water bottles of size 1 to 2 litres, as anything smaller needs filling too frequently, and the green blends in with the plants quite nicely. With the 2 litre bottles you will get:Warkhome: 2 litres discharged in about 14 days (this is a rough guess)Blumat.2 @.2l /day: 2 litres discharged in 10 daysBlumat.3 @.3l /day: 2 litres discharged in 7 daysSo now you need to calculate which one of the three to buy, and the answer is obvious, and you already have the data. How often do you water the plants in question? Suppose you have a large outdoor plant box that you water once a week in Summer to keep them alive. You will need one of the Blumat adapters because it is outdoor. Now if your watering can size is 7 litres, you know that your windowbox needs 1 litre per day.That is provided either by 5 of the Blumat.2, or 3 of the Blumat.3If you put the Blumat.2 it will last 10 days, and if you put the Blumat.3 it will last a weekActually, since you water your plants before you go away anyway, it will last longer than the above, but you get the idea.Anyway, so then your choice is between having 3 bottles or 5 bottles visually cluttering your plants. Or, the choice could be between using 1 litre green bottles that disappear but need frequent refilling and 2 litre green bottles that are more visibly intrusive. It's upto you, but now you can choose the balance you want between strict functional requirements, aesthetics, and re-filling convenience.If you are using the Warkhome type spikes, you can just stick lift the bottle out of the spike, to refill it, because it is only a loose fit. When you put it back, just put 2 fingers over the bottle opening, invert it, then slip it quickly into the spike's mouth. Only a small amount of water will leak out while you are doing that. If you are using the Blumat, it is tightly sealed into the pot so if you lift the bottle it will pull the pot out as well. This is not good because it is disrupting the join between the pot and the soil, apart from spreading dirt into your home. Instead, it is best to drill a hole in the bottom of the water bottle, big enough to take a funnel. The hole needs to be surprisingly large, say around 16mm, in order to take a reasonable size funnel. If you use a small funnel, it will take too long to fill. Also, if the funnel completely seals the hole, you need to punch another small hole somewhere else near the top, to allow the air to leak out as the water comes in.Hope this helps!
Reisefeh
Bewertet in Deutschland am 6. Juni 2015
Für mich ideal, da ich 2 Wohnsitze jeweils mit Blumenkästen etc. habe und das bisher im Sommer immer ein Problem war. Während es ja eine Vielzahl vieler gute Blumenkästen mit Bewässerung gibt , war es bisher für Topfpflanzen nicht so einfach Ihnen im Sommer genug Wasser zu geben, oder für Blumen in Schalen etc. wo keine Vorratsbewässerung möglich ist.Jetzt ist alles ganz easy, je nach Bedarf verschieden große Plastikflaschen mit dem Blumatteil bestücken, oben mit eniem Loch versehen- ich habe es groß genug gemacht um mit der Gießkanne bequem nachfüllen zu können und in den Topf etc. stecken, große Flaschen sind natürlich etwas windanfällig, aber es findet sich immer eine Möglichkeit, sie auch hier sicher anzubringen.Das Wasser rinnt ständig aus der Flasche, ca 1/4 l pro Tag, und hält so die Erde feucht. Wichtig ist natürlich darauf zu achten, dass keine Staunässe entsteht., vor allem an nicht so heißen/ sonnigen Tagen. Ich fahre nun recht beruhigt weg, wenn ich weiß, dass die Blumen gut versorgt sind und sie danken es mir mit herrlichen Blühergebnissen - gerade wieder einige nachbestellt 😄