Warenkorb

Ihr Warenkorb ist leer

Ihr Warenkorb ist leer

BOOMSTICK Bullet Puller Kinetic Style Impact Bullet Remover Fit .17 bis 50-70 Govt, Blau

Kostenloser Versand ab 25.99€

21.12€

9 .99 9.99€

Auf Lager
  • Entfernt sicher und effektiv Bälle aus ihren Patronen
  • Auszugsstil
  • Funktioniert mit jedem Kaliber .17 Remington bis 50-70 govt
  • Einfach und leicht zu verwenden
  • Packmaß: 30,5 x 12,4 x 1,35 cm. Die Größe des Griffs beträgt 2,6 x 2,1 cm und misst 10 cm in der Gesamtlänge



Chris
Bewertet in Großbritannien am 16. September 2021
Used to pull a large amount of rounds already and still going strong 👍
Mike D'
Bewertet in Kanada am 20. November 2020
New to reloading. Made a few errors at first. Really wanted to save the projectile & powder. This had easy to follow instructions and worked just as advertised.
Ken D
Bewertet in Kanada am 9. Oktober 2019
Even with my heavy crimped 44 Magnum cartridges this puller works great.A good rap or two on a heavy piece of wooden 4 x 4 and the cartridge will come apart safely.Way better price than others.I am happy with this purchase
Galindo.electron
Bewertet in Mexiko am 4. Dezember 2019
Se me estrelló en la parte rosacada, el plástico se ve muy fácil de estrellarse usandolo con cuidado te puede durar más tiempo, su funcionalidad es buena
FL Odie
Bewertet in den USA am2. Oktober 2019
I teach a reloading class, and part of that class is to demonstrate how to safely disassemble cartridges (the ones that might have been improperly assembled). So, this tool gets used a LOT. My previous one broke (Lexan plastic finally gave up from all the pounding), and I had used it so much that I wsn't going to try to ask the manufacturer to replace it. So, bought an exact replacement to what I previously had, and expect that this one will last for years and years and years, just like the previous one did. So, buy with confidence. A great price for a great tool.BTW, a couple of tips for using the tool:1) Always use the correct size collet (they give you a whole set of different sizes when you buy the tool) for the cartridge you are going to disassemble.2) The rounded part of the collet goes towards the plastic nut. If you install the collet backwards, you will rip the lip off the collet. Rounded part towards the plastic nut.3) No need to over tighten the plastic nut. However, you don't want it loose either. Just snug is fine.4) Do not whack this tool on any metal objects. I strongly suggest that you use this tool on the end of a piece of 2X4. If you hit it on metal, the plastic will shatter, and you could get injured. The end grain of a 2X4 properly absorbs the impact, allowing he tool to work properly.5) Always wear safety glasses during the use of this and all tools. The tool may be replaceable, but your eyes are not.
Produktempfehlungen

26.22€

12 .99 12.99€

4.7
Option wählen

14.99€

6 .99 6.99€

4.3
Option wählen

21.90€

9 .99 9.99€

4.4
Option wählen

49.99€

21 .99 21.99€

4.9
Option wählen

34.95€

17 .99 17.99€

4.7
Option wählen

48.99€

21 .99 21.99€

4.9
Option wählen