Warenkorb

Ihr Warenkorb ist leer

Ihr Warenkorb ist leer

display4top schwarz verstellbar drehbar Rolling Kissen Tattoo Massage Hydraulische Salon Hocker mit Rücken, 5 Wheels

Kostenloser Versand ab 25.99€

70.59€

31 .99 31.99€

Auf Lager

Info zu diesem Artikel

  • Große, gepolsterte Sitzfläche, PU-Leder mit Formschaum widerstehen Wasser, Öl und Kratzen.
  • Drehbar 360 Grad anhaltenden höhenverstellbar Gasdruckfeder (niedrigste Sitzhöhe mit Kissen: 42 cm – höchste: 60 cm, Sitz-Kissen 35 cm Ø)
  • Leicht und kompakt für einfachen Transport; keine Werkzeuge erforderlich
  • Sitzpolster aus PU, Schwamm gepolstert, angenehme Sitzfläche.Modernes Design, ideal für Bars, Pubs, Salon, Spa, Massage, Arztpraxis etc.
  • Die Montage der Salon Hocker wird flach verpackt geliefert, und kann innerhalb von ein paar Minuten nach den Anweisungen. Es bedeutet auch, dass es kann zerlegt für einfache Handhabung.



Produktinformation

Das Video zeigt das verwendete Produkt.Das Video führt dich durch die Produkteinrichtung.Das Video vergleicht mehrere Produkte.Das Video zeigt das Produkt beim Auspacken.
Drehhocker mit Rückenlehne
Verstellbarer Rollhocker

gretemo
Bewertet in Deutschland am 7. Januar 2025
Funktioniert sehr gut! Gute Qualität, alles bestens!
Tommy
Bewertet in Deutschland am 7. Februar 2025
Wygląd jak w opisie. Trwały i wytrzymały do tej pory na nim siedzę. Wygodny
Britta Holmes
Bewertet in Deutschland am 6. Dezember 2024
Bin absolut begeistert von diesem Stuhl. Am prime day günstig bekommen und absolut zufrieden. Würde ich jederzeit wieder kaufen
Andrea Freitag
Bewertet in Deutschland am 5. November 2024
Leicht zusammen zu bauen und Qualität und Preis passen. Rollt auch sehr gut 👍Auch der Sitz ist sehr gut gepolstert.
Andrii Glodin
Bewertet in Deutschland am 29. Oktober 2024
Alles ist in Ordnung. Ich bin glücklich. Ich empfehle
Funnycat
Bewertet in Deutschland am 26. Februar 2024
Der Stuhl ist einfach beim zusammenbauen.Es sieht gut aus und ist bequem
Client d'
Bewertet in Frankreich am 22. September 2024
très pratique pour rouler sans me lever d'un endroit a un autre dans mon atelier
Willy
Bewertet in Deutschland am 5. Januar 2023
Bei dem Zusammenbau des Hockers taten sich schon direkt Probleme auf weil zwei von den vier Schrauben zu kurz waren und die Einschraubhülsen zu tief im Futter des Sitzpolsters eingelassen wurden, zum Glück hatte ich in meinem Werkzeugschrank noch ein paar längere Schrauben die ich dafür gebrauchen konnte.Für kleinere Arbeiten am Airbrush Tisch reicht der Stuhl aus, aber für größere Arbeiten ist der Hocker leider ungenügend und sehr wackelig.Dann doch lieber beim nächsten Mal einen hochwertigeren und teureren Hocker kaufen.
Roos-Anne Samsom
Bewertet in den Niederlanden am 4. August 2022
Ik heb deze kruk aangeschaft omdat deze net iets lager ingesteld kan worden, daardoor het perfecte krukje voor mij om gitaar te oefenen maar ook om aan tafel lekker te kunnen puzzelen terwijl ik beter rechtop zit. Het zitgedeelte is wel gevoelig voor krassen.
LIZ
Bewertet in Spanien am 15. September 2021
Muy fácil de montar, Ben de calidad, ajustable de altura, perfecto para uso en peluquería
Kunde
Bewertet in Deutschland am 30. April 2020
Sitzt, passt, wackelt nicht. Super schnell moniert und bequem. Für größere Popos/ Übergewichtige Personen nicht so gut geeignet, da die Sitzfläche dann zu klein ist. Ich finde das Teil super und es ist platzsparend.
Willie
Bewertet in Italien am 13. September 2019
Super imbottito e super comodo io lo uso per tatuare e mi trovo benissimo ! Qualità molto superiore al prezzo!Semplicissimo da montare e le ruote scorrono benissimo
DRUMMERof69
Bewertet in Großbritannien am 27. November 2018
I ordered this small stool to replace one on which the PVC seat cover had split, and I am not at all disappointed. It is slightly smaller than my previous one, and this is a bonus as I can now store it under my desk as opposed to in front of it.The upholstery is well finished, no loose stitching, or wrinkles in the fabric, and the welding which secures the legs to the upright, is hidden by a plastic / chrome "push on" cover. This cover feels rather flimsy, especially when pushing it down and over the welds. I had a feeling it would break, but it didn't! The castors are a push fit, along with circlips, into the holes in the legs. It takes quite a bit of force to do this, but once in, they are there to stay. If used on a deep pile carpet they would probably "dig in" and prevent movement. However, on solid flooring they move perfectly well. The seat fixes to the upright with a steel plate and four Allen bolts. This steel plate also houses the "gas lift" lever, which if you wish, can be fitted / pointed in any of four directions, depending on your preference.The seat itself is reasonably comfortable with it's very thin padding, and it also has a slightly raised back to it. This is approximately 17 / 18cms. at it's highest point, therefore does not provide any lumbar support at all. It is purley to prevent one from sliding off! I don't think anyone would want to spend to many hours sat upon this stool.It really is just for what I would call, "short duration" work sessions or similar.All in all I am very pleased with it. My only complaint is with the packaging, and I am surprised the stool arrived in good condition. The carboard box wan't very thick, and was badly damaged upon arrival. The bottom was completely open on one side, and there were a few holes and rips in the main body. The various parts of the stool were covered with just a few bits of corrugated cardboard and bubble wrap. There were no assembly instructions at all, the "weld cover" was rolling about in the box, along with a small pastic bag containing 4 bolts and an allen key. Given that the box was open, I considered myself lucky that those loose items hadn't fallen out. Maybe the instructions had!!Although assembly was common sense, not everyone may feel that way and instruction might be needed.One could assume that the damage ocurred in transit, but that we'll never know.Overall, a good purchase, but it could / should have been better packed.
Produktempfehlungen