Ihr Warenkorb ist leer
Ihr Warenkorb ist leerDorman bietet eine umfassende Reihe von Startschaltern für fast jede Autoreparatur. Alle unsere Starterschalter sind aus hochwertigen Materialien für eine lange Haltbarkeit konstruiert.
NDW
Bewertet in den USA am13. November 2024
Fits and works Great
RP
Bewertet in Kanada am 31. August 2023
Better quality than the cheaper one I got previously which started to have bad contacts on the inside turning off the tractor. This one works fine and is the exact same shape and size as the original one in my Case 644 tractor.
Chris
Bewertet in Kanada am 3. August 2023
Not cheap, very good product
ムギ
Bewertet in Japan am 13. Februar 2022
開封されたものが届きました。運搬中に自然に開封されたとは思えず、気持ち悪いです。ゲームのETS2様に購入。どこかに固定する方法を考える必要があります。今のところ普通に使えてはいます。
WILLIAM F DAVIS
Bewertet in den USA am21. März 2019
I needed a modern approach toward key ignition for my 1947 Crosley, so I combined this switch with a 6v automotive relay to better sort out the electrical needs of this car, and improve the starting sequence.There's an accessory position (ACC post) to connect the wipers and radio, Ignition position (IGN post) to connect the engine spark electrical, gauges, and charging feedback, a battery position (BAT post) to power visibility light switch, brake light switch, horn, and finally the momentary start position (middle post) to trigger the starter solenoid via the automotive starter relay.No more turning the key and pressing a button to start the car, It's all done at the key like on newer cars! Good current strength too. Works well on a 6 volt car, and I'm sure it works the same on 12 volt systems. This switch doesn't care if your car uses a positive or negative ground system.Notes: the momentary starter position (middle terminal post) disconnects the ACC (accessory) post to protect the radio while starting the engine. ACC stays on when in the IGN position. Clockwise key positions are (ACC, OFF, IGN, START).Key is inserted and removed only in the OFF position. ACC, IGN, and BAT terminal posts are labeled on the back. The momentary start positions terminal post is unmarked and raised in the middle between the other terminal posts.My switch came with a matching set of four keys. I would suggest wiring the backup switch to the IGN post, not the BAT or ACC posts. Wire wiper motor power to ACC so you clear your window while parked and listening to the radio with the engine off.Rugged and good quality switch. Thanks!
Produktempfehlungen
