Warenkorb

Ihr Warenkorb ist leer

Ihr Warenkorb ist leer

Ersatzdeckel, kompatibel mit Stanley Adventure Bierglas, auslaufsicherer und isolierter Deckel zum Stapeln von Metall-Trinkbechern, 2 Stück

Kostenloser Versand ab 25.99€

35.83€

16 .99 16.99€

Auf Lager

Info zu diesem Artikel

  • 【Kompatibilität】 Dieser Wasserflaschen-Ersatzdeckel ist nur kompatibel mit dem Stanley Beer Pint Glas Tumbler.
  • Isolierleistung: Der Silikonstopfen an der Oberseite des Wasserflaschendeckels und das Flip-Top-Design ermöglichen es dem Stanley Bier-Pint-Becher, Getränke länger kalt oder heiß zu halten, um sicherzustellen, dass Sie Ihre Getränke über einen längeren Zeitraum bei der idealen Temperatur genießen können.
  • 【BPA-freies Material】 Der Ersatzdeckel für das Stanley Beer Pint besteht aus BPA-freiem Kunststoff, der ein sicheres Trinken gewährleistet. Es ist auch spülmaschinenfest.
  • 【Einfach zu bedienen】Der Deckel kann durch Umklappen der oberen Abdeckung geöffnet und geschlossen werden. Die obere Abdeckung ist speziell für Strohhalme konzipiert, sodass Sie direkt trinken oder einen Strohhalm verwenden können. (Entfernen Sie den Silikonstopfen, um einen 10-mm-Strohhalm zu verwenden.)
  • Durchdachtes Design: Mit mehreren Verschlussdeckeln und Dichtungen ist es für einfachen Transport konzipiert, sodass Sie sich beim Tragen im Freien keine Sorgen um Verschüttungen machen müssen.


Ersatzdeckel


David Quinones
Bewertet in den USA am7. März 2025
Well, this one was pretty interesting. The first thing I did without paying close attention to the lid and the seal, I went ahead replace two old ones for these in tumblers with coffee. I didn't realize that the kids were too loose. Accident happens, and the two tumblers felt down at the same time each lid slipped off full of coffee and even had small cracks. When I looked closely the "Seal" was not big enough as to sit tie and prevent the lid from falling. I admit that I should've checked well, but definitely the seal was a poor workmanship for these lids. I'm returning them.
Customer
Bewertet in den USA am26. Mai 2025
Help with spills
L. Lamour
Bewertet in den USA am24. Mai 2025
Purchased this for my Stanley Cup that didn’t come with a lid perfect fit
Jacob D Lester
Bewertet in den USA am28. April 2025
I want to like this item so much as the lid itself made my mug operate so much better, in some cases, it may keep coffee hotter than my Yeti.Pros1. The lid fits in the cup like it's supposed to.2. The lid makes the Stanley pint cup almost spill-proof; if you knock it over, very little will come out.3. The design and function look to be well thought out.Cons1. Flash from the injection mold was never cleaned off. One place in particular was just under the seal, long term, this would have reduced the life of the seal and cut through it.2. The lid is very thin compared to other lids on the market. I believe this contributes to the lid being fragile as it starts to separate and crack along the seam in the center.Final thoughtsThe product works as intended and is a considerable upgrade to the Stanley Pint stackable cups. A little QC would go a long way for this product. Lid thickness and durability are really holding back my rating at this time.
SacDad
Bewertet in den USA am25. April 2025
decent lid. Qualities is OK. But it serves its purpose just fine. For example, yeti lids have a magnetic sliding cover, which works marvelously. This one just has a piece of plastic that pops into place. But given the price difference is they both work just fine at the end of the day.
Produktempfehlungen