When purchasing, my quest was simple: to find a robust, reliable and easy-to-use plane for my DIY projects. Attracted by its reputation, I had high expectations for its performance and durability.Using the GreatNeck C4 was a revelation. Its intuitive handling and precise adjustment allowed me to achieve impeccable finishes. However, I noticed that for prolonged work, its weight can become a slight inconvenience.Quality-wise, the GreatNeck C4 stands out. Its durable steel blade guarantees a clean and precise cut. In terms of performance, it perfectly meets the needs of domestic work, although it can sometimes struggle on harder materials.Benefits :- Remarkable cutting precision- Ease of use and adjustment- Durable constructionDisadvantages:- Slightly heavy weight for prolonged use- Less effective on very hard materialsTo optimize its use, I recommend checking and adjusting the blade regularly. Careful maintenance will extend its lifespan and ensure consistent results.It is equipped with a high-quality steel blade, an ergonomic handle and a precise adjustment mechanism. Ideal for planing wood, it offers a 2-inch cutting width, perfect for household work and small woodworking projects.A great choice for DIY enthusiasts. Its quality, precision and ease of use make it an essential tool. Remember, proper maintenance is the key to taking full advantage of its capabilities.

Im an overseas buyer and trusted buying on Amazon but today i m surprise when i received the item due to following:1) box is like very old and delapidated (doesn't matter so long the item inside is the same as advertised)2) product has no marking or branding on it as in the photo or anywhre on the producr at all.3) base of the rear handle is smaller compare to the advertised photo4) color is different (doesnt matter but i believe it shoud be mention, since im doubting the authenticity of theproduct.Now Im not sure wheather i got original or imitated copy of it.I dont see the option to add/upload photo, i wish i could do it.

Good and very handy carpentry tool to have. Works well enough for light duty work!

Very disappointed with this purchase I have worked for many hours trying to tune this plane without success, the chatter on an ordinary piece of pine 50mm wide cannot be reduced to an acceptable level. I have 7 other wood planes mainly Stanley but they include a AU$23 new no named plane from another online source that with a bit of tuning cuts nicely. I bought the Great Neck C4 thinking it looked so good and would come up well with some tuning, I was mistaken.

This plane is a quality product--especially for the price. Like other reviews have stated, you have to understand what to expect out of the plane fresh out of the box. When I took it out of the box it is immediately obvious that the machining is a bit rough--60 or so grit I am guessing. However, even though it was rough things looked relatively flat and was what I expected from the factory.I immediately began prepping the plane to bring it up to higher standards before making use of it in my wood working projects.The first thing I did was I flattened the sole and the sides. Using a 1x1ft granite tile I bought from Home Depot for $5 as a flat surface, I clamped sand paper to it in order to sand the sole and the sides dead flat. I started with 150 grit and for the last hour of sanding used 120 grit. I honestly would recommend going straight to 100 or 120. I have uploaded pictures of the bottom of the plane showing the sanding progress. One photo is after about 1 hour of sanding at 150 grit. You can see the bottom was cupped in the middle and to one side while the rest was hitting the sand paper. The next photo is of the plane all done with sanding and dead flat. It took about 5 hours of sanding in order to get the sole and both sides perfectly flat with no dimples in the surface. This is a bit overkill as you can have a minor amount of cupping without it really affecting your work--but after investing 3.5 hours of sanding I figured why not go all the way?After sanding (5 hours total) I was able to check for square with my Combination square and the results looked great and are included as an image in this review.Last but not least, like any plane iron, its got to be honed. I honed it using grades of sandpaper and eventually making it to my japanese water stones rated at 1000/6000 grit. The blade takes a good edge and seems to keep it as well.Paul Sellers, a well known master woodworker, has a youtube video that shows the process of restoring a plane which can be applied to any new plane as well: https://www.youtube.com/watch?v=RYyV6IUpsYkAfter bringing the plane up to spec, you will need to set the plane based on what you would like to do with the plane. Personally I am using this plane as a shooting board plane. So I have mine set very shallow and the sharp blade is an absolute must. This plane performs wonderfully as a shooting plane. Paul sellers has great videos explaining how to set planes as well.The sole is about 2.5x9 inches. The sides, at their highest, are about 1.5 inches.Pros:*Awesome value.*Good machining when it comes to being square.*Works well as a shooting planeCons:*A TON of work bring it up to spec (-1/2 star)Additional Considerations:Be aware of safety while sanding. You do not want to breath metal dust.Overall: 4.5/5 stars (>=.5 rounds up, 5 starsIf you have any further questions regarding the product in my review please leave a comment below and I will get back to you as soon as possible.