Ihr Warenkorb ist leer
Ihr Warenkorb ist leerdavid
Bewertet in Großbritannien am 4. Mai 2025
Just perfect
EdJack
Bewertet in den USA am16. Januar 2025
I needed a second set of J hooks for my 2.3 x 2.3 HulkFit rack, in order to reposition the barbell easier between different exercises. So decided to try the upgraded version with the resin pads. They seem to be identical to the original J hooks, except that they are tapped to allow for countersunk machine screws to attach the resin pads. Pictures show original J hook on top, and resin J hook on bottom for comparison. All is good, except for the bottom screws that are to long and protrude past the backside of the metal plate. This will then cause it to bind up when attaching and eventually scratch the rack when the screws punch through the felt on the backside. Many other reviews say this same thing about those bottom screws being to long, and some mention buying shorter screws (5mm instead of 10mm) to solve that problem. I used a couple small washers, which then seemed to solve the problem, by allowing the screw to be backed out some from protruding past the backside. I do like that it is a smooth resin, that allows me to slide the barbell left or right a couple inches easily to line it up centered in the rack. Overall, very happy with the purchase.
Fizzer
Bewertet in Kanada am 2. Dezember 2024
Fit well to my 2.3” cage. Seem to be sturdy but haven’t really put a lot of weight in them yet.Do be careful with screw heads for the pads. Two of my screws were not tightened enough so they protrude out the surface and marred my barbell. Get a large Philips screw driver and tighten up the screws before using.
Giuseppe I
Bewertet in den USA am18. September 2024
The Hulkfit Spotter Arm Straps are much better than the steel bars that come with the older racks. In case of a slip and drop, the straps protect the barbells knurling and protect the barbell from being damaged and protects the barbell from bending. The nylon straps are very thick and look durable. The only disappointment is they do not have J hooks on the end like the straight steel bars. Otherwise, I would recommend these for anyone who has a Hulkfit Pro Series Rack.
Alexander
Bewertet in Deutschland am 16. April 2024
Ich war lange auf der Suche nach passenden Langhantel-Halterungen und bin hier fündig geworden, die Maße sind leider schwer zu finden, daher bin ich wirklich glücklich, dass auch die Qualität passt. Gerne wieder!
Customer
Bewertet in den USA am30. August 2023
Very sturdy and good fit for rack. Much heavier and more precise design than other version of j-hook. Has lining on inside to reduce scratches on rack. It looks like there is a challenge on one screw for the resin pad riser. Screws are countersunk M4 and all have room to protrude thru the back side of the metal plate except for one. The bottom screw of the riser resin pad will rub against and scratch the rack if too long. This they have to be shorter than standard size. Picked these up from Amazon warehouse labeled as like new. Looks like previous customer tried to fix this issue with a different and shorter machine screw on the resin pad. They are not holding so the riser plate can shift side to side a little. I will work with customer support to figure this out.9/1) Update to original review. The typical starting length of M4 screw is 10mm. I was able to replace the two screws with M4x5mm. They work great.
Produktempfehlungen
