Ihr Warenkorb ist leer
Ihr Warenkorb ist leer Ersatz-Kunststoff-Halterkopf.
Der Metallhalterungskopf ist so stark, dass Sie robuste Wischmopps wie Drahtbodenbürsten für eine lange Zeit verwenden können.
Geeignet für Holz- oder Metallgriffe, amerikanischer Gewindekopf.
Lieferumfang:
- 1 x Bürstenzubehör.
- 1 x Schraubmontage-Set.
Pat
Bewertet in den USA am2. Januar 2025
I have a broom that I purchased in 1990 for sweeping on very smooth finished floors. It was GREAT, and it lasted for all these years, but the fibers became so bent and worn that it was time to get a new broom head. I purchased a broom head with very soft fibers that I really liked, except that the pre-drilled holes in the wooden base where you screw in the broom handle were drilled at an angle that was WAY too upright (angled too high) for sweeping. For me, this bracket has the correct angle for sweeping, but I had to do some pretty precise measuring (and some pretty precise drilling) into the wooden broom head to make this work. I also had to use my own 3/4" screws. But with the addition of the support bracket that I had from the older broom head, I now have a GREAT broom. The only reason I'm not giving it a 5-star is because I feel that it is too narrow, meaning that all the leverage when wou are sweeping is on the two screws. PS - If you decide to use this bracket, make sure you center it on the broom head, not just side to side but also front to back so that you can rotate the broom head occasionally to extend its life. Hope this helps!
Donsco
Bewertet in den USA am16. Februar 2025
Not Structurally strong. Use handle braces or don't buy these.
Kenneth E Turner
Bewertet in den USA am13. Januar 2025
Used to attach brush to a broom handle. Worked as planned.
Steve hotchkiss
Bewertet in den USA am19. April 2025
It worked just fine. Cast aluminum but does the job
Produktempfehlungen
