Ich bin sehr sehr zufrieden, die Kommode ist stabil, massiv, hochwertig. Es lohnt sich, so etwas zu kaufen.

I love the way this cabinet looks. I assembled it by myself. The assembly is very similar to an IKEA furniture and instructions are also similar, so if you are familiar with assembling IKEA furniture then it is so easy to do this. But make sure you follow the instructions literally, even if you are an expert. I took my time and laid out all the pieces and hardware. If a label is missing then better you identify from the parts list (you can easily do so by matching the holes and slots) and label it before assembling, as a wrong panel used for the assembly will be pain to correct. It took about 2 hours to assemble, but I took some breaks. The instructions are visual and you really need to pay attention, but all-in-all it was easy. You don’t need a power screwdriver or similar. The only tool you require is a Phillips screw driver (PH2). The unit is as sturdy as you would expect. I think any layman can follow the instructions. Make sure you read the instructions very well to make it clear which way something goes because if you don’t follow it then the end product may not look the same. I had no problems of holes not lining up or any alignment issues. Everything matched perfectly well. The hinges are fixed with self-tapping screws and hence there no pre-drilled holes, but the location is punched on the panel so no issues. Most of the assembly can be done by one person, except probably the door which is better to get someone help to hold.The only problem I had was that when I lifted the assembly A+K (at step 6 of the assembly process) the joint got broken (shown in one of the pictures). It’s actually my carelessness which caused the issue, but I will also blame it on the design. It could happen to any of you. Make sure you don’t move/lift the assembly by holding the thin K panel which is very weak to handle the weight of panel A. But even if it is broken, it won’t cause much of an issue as it’s only a support for the back panel.The product is well made and sturdy, it’s stronger than an IKEA cabinet. It’s not made of solid wood, but MDF board. Each shelf panel can be adjusted at 3 positions to suit your requirements. If the door does not close well, then adjust the screws on the hinges. The back plywood panel is much stronger than the IKEA design. If the cabinet need levelling then it can be done by adjusting the screwed rubber shoes at the bottom of the legs.To sum it up, I am very happy with the cabinet. They went together very well. Everything was marked, not only the pieces but the screw bags as well. It has lots of storage capacity.

I love this little unit.Pretty easy to buildVery sturdy.Looks lovely in my living room.Would definitely recommend,

It arrived damaged, and there was permanent marker wrote on one of the pieces... The pieces were also incorrectly labelled.... Avoid at all cost. A nightmare

Kommode wirkt sehr wertig und gefällt uns wirklich gut. Wir waren aufgrund des Preises zuerst etwas skeptisch bzgl. der Qualität und ob es vielleicht billig wirkt, dies hat sich aber überhaupt nicht bestätigt.Der Aufbau ist etwas tricky für so eine kleine Kommode, aber geht in Ordnung mit etwas Geschick und Verstand. Ein Halter für einen Regalboden hat gefehlt, was wir aber problemlos im Baumarkt für 15ct nachkaufen konnten.

Love this look more expensive than what it costs very stylish

Relativ leichter Aufbau, leicht verständliche Aufbau Anleitung und sind stabil. Gefallen mir sehr gut!

Assembly was a pain. There were quite a few problems (some our own doing and some not):* The ‘joiner’ screws didn’t really fit in the holes and required us to use the electric screwdriver to get in, and that was more ‘by force’.* There was a hole missing for a screw with large rubber washer on the middle section. I’m not 100% sure what that screw/washer was for, maybe as a ‘stopper’ to stop the cabinet door from being pushed in too far? But the hole was definitely missing, we checked to see if we had the middle section the wrong way round.* The backboards are really a flimsy, only a couple of mm thick. They are protected by a ‘backbone’ and aren’t structurally important but they felt a bit out of place compared to everything else.* The right hand shelf we put in upside down by accident so the screw are on top and showing. Not possible to remove without taking the whole unit apart so not going to do that.All the above is pretty minor but we did run into some major issues with the product.* The left side internal shelves don’t sit level. The two shelves have 3 height settings (changed by little plugs) but none of the options create a level plane. Both the top, bottom and the door all sit flush so this isn’t a construction issue on our side where something is out of level. As such I cannot use the left hand shelves.* There are ‘screw locks’ that lock the parts in place. This makes it very stable but the screw locks are very hard to get out. This means disassembly isn’t really possible. The screw locks loosen okay but do not pop out.I think the shelving is the worst part to this, even if we rotated the middle section 180 degrees the holes would still be out of sync and would not create a level plane. Luckily you don’t have to have the shelves inI hope you found this review useful.If you have a question, I always try to respond when Amazon forwards them to me.