Ihr Warenkorb ist leer
Ihr Warenkorb ist leerAUX Lights on off switch toyota switch spst switch OEM replacement switch for Toyota Sequoia Highlander Tacoma Tundra 4Runner RAVR Yaris with wiring harness toggle switch rocker switch
Customer
Bewertet in den USA am4. Mai 2025
Love it
DrB
Bewertet in den USA am11. Januar 2025
So I wanted to use a switch that fit into the factory covered space locations in my 2008 tundra, to get rid of an after market light switch which hung down from under the steering wheel when I purchased the vehicle.This fit in the hole and is functional, the switch came with the connection and long enough pig-tail to hook to the existing after market lighting wires.I will say, while this does work, and light, it does not 100 per cent fit flush... it is sunk in just a little (all the time) not just when turned on. If your OCD is like mine. this may not be the best solution out there..... it is 1000 percent better than a dangling switch under the steering, but it may not be my permanent solution.DrB
CrazyMonkey1208
Bewertet in den USA am1. Mai 2025
Doesn't fit 2008 style Highlander. Switch works fine, but it sinks too far into the blank slot in the dash (by the wiper defroster button and dash backlight dimmer switch) so once you turn on the lights you can't turn them off, the button must be hitting the edges of the dash cutout. So if you're buying this for a 2nd gen Highlander, look elsewhere. I taped the back of mine with electrical tape to keep it from locking into the slot for the time being until I find something better that works.EDIT: So today on a whim I decided to see if it fit in a different "blank" spot, this one being the closest to the steering column, and to my surprise it fit and works perfect. In the other blank next to the windshield wiper defroster button it didn't work. Strange. Plan on trying it in different unused switch spots, they're not all the same I recon.
Spark
Bewertet in den USA am26. April 2025
I bought this product on Dec 2024 I'm still using it the only problem I faced is the brightness of the leds.
Meh
Bewertet in den USA am5. Dezember 2024
Installed in an 08 Tundra, the button isn’t quite flush with the panel when not pressed, as pictured (and quite recessed when it is pressed). Was easy enough to hook up to a Nilight wiring harness, and used a fuse tap to hook into the ACC circuit. Wish the wire leads were a little longer, but it worked well enough.The blue lights don’t match the rest of the orange backlights, but I knew that when I bought it, just wish it was an option.Edit: I moved the button to a different spot (other side of the RSCA Off button) and it sits at the correct depth. The pins inside the button for the pigtail bend very easily so limit the number of times you connect them together
Produktempfehlungen
