Ihr Warenkorb ist leer
Ihr Warenkorb ist leerCyrPo
Bewertet in Frankreich am 4. Oktober 2024
Produit de bonne qualité je recommande
Darryl
Bewertet in Großbritannien am 14. September 2024
This makes perfect 8mm plugs that can be glued and hammered in. I wasn't using a drill press and was fortunate my (JCB) hand drill chuck would open just enough for this bit.It can be a bit of a trick to get started by hand, as the bit will jump until it gets started.Was definitely a good purchase and enabled me to make plugs to strengthen a crack in a shelf.
James Chippett
Bewertet in Großbritannien am 14. April 2024
Used this to create dowls from seasoned Oak. I cut at least 40 dowls, making sure not to over heat the bit and it was fine. I just put a file across it at the end to bring the edge back to a prickly finish.
Navo
Bewertet in Großbritannien am 26. April 2024
I acquired this because I needed to cut 8mm plugs. Unfortunately its utility is limited because the 13mm shank is too large to fit in the typical router or drill chuck.
Produktempfehlungen