Entrega y producto perfectas

Dieser Artikel hat einen Wert von schätzungsweise 10,00€ der Preis ist reiner Wucher

Ein sehr schöner Bausatz!Habe auch schon Stormtrooper für Diorama gebaut.Preis / Leistung ist Ok.Lieferzeit ist auch Ok.

The parts have to be assembled by yourself without glue.I needed a small fingernail-scissor (Nagelschere) for cutting the parts out,a small nail-file (Nagelfeile) for filing/rasp away the joint/casting seam (Gußnaht)and a lot of patience.I think it took me at least about 5 hours for completing the figurine,but I really enjoyed the work and finally the figurine came out perfect.It's parts are perfectly designed and very precise.A few parts are very small and I was afraid of breaking an important part,but I took my time for it and all went good.You need patience and a bit of sure instinct (Fingespitzengefühl) to get happy.

This kit has every detail of the full size suit used in the movies, it's all there. The option to choose various parts (dented vs non-dented head, etc was a nice bonus. He's not very poseable, but neither wa the suit Anthony Daniels wore in the movies, I'd say they are identical. Didn't take long to assemble either and a small amount of paint goes a long way to making him look like the dingy oily droid he was. Very happy with this kit!The proportion and detail of this kit is better than any $100+ statue I've found. It really is impressive.

..... es wäre hilfreich gewesen wenn wo gestanden hätte das das alles in EINZELTEILE kommt . Dann hätte ich es nicht bestellt, die Verpackung war aber erstklassig !!! Zum Glück ist mein Mann Eisenbahn Fan und gewohnt solch Futzelzeug zusammen zu basteln . Allerdings 2 winzige goldene Teile sind weg geflogen ,und wurden nie wieder gesehen . Wenn die Figur im groben schon zusammen gesetzt worden wäre - ja das wäre supi gewesen.Aber Schlussendlich schaut es gut aus ,ich freue mich.

Die Lieferung beträgt ca.21 Tage bedingt durch die Entfernung Japan und dem Zoll. Denn durch diese Gasse gehen du musst. Dann aber ist das Päckchen da und beim auspacken kommt die Ernüchterung. Die Teile sind ernom viel und klein. Also Geduld du haben musst. Man sollte eine feine Pinzette und eine Led- Oder Lichtlupe haben. Denn sonst verliert man die Geduld. Am Ende wirst du belohnt und stolz sein. Denn wenn es fertig ist- so in ca 4 Stunden ( gefühlte 4 Tage) ist das Ergebnis weitgesehen , positiv. Da die Teile an einem Gussraster befestigt sind kommt es mal vor, dass das Gold abgeplatzt ist. Was nicht schlimm ist bei dem Droiden. Ich empfehle die Nähte mit einem Teppichmesser ab zu hobeln. So passen die Teile besser zusammen.Ich werde mir von Bandai noch weitere Basteleien bestellen. Achso nochvwas- Wer nicht keine Fingerfertigkeit besitzt, sollte am Anfang mit C-3PO beginnen.

Ein erstklassiger, absolut erste Sahne Bausatz!!! Die goldene Oberfläche ist makellos und da man bei BANDAI keinen Kleber benötigt, bleibt das auch so. Ich denk da jetzt an die fast unvermeidlichen Flecken durch Klebstoff am Finger beim Zusammendrücken der Teile.Verschiedene Ausführungen sind baubar. Arme beweglich oder fest. Das kleine Sprechgerät aus "Eine neue Hoffnung" ist genauso dabei wie der Sperrbolzen.Für STARWARS Fans praktisch ein Muss den zu haben. R2-D2 und BB-8 haben sich auch schon dazugesellt und der "Falke" ist auch schon unterwegs. Was BANDAI da an Bausätzen abliefert, ist das Beste was ich je in den Händen hatte. Ist Tamiya schon perfekt, schaffen die es noch einen draufzusetzen!Ich wünsche Euch viel Spass, wenn ihr Eure Modelle auch habt.

Spedizione un po' in ritardo a parte (cosa che avevo già previsto, visto che viene direttamente dal Giappone), il prodotto è stupendo! Non è molto difficile da montare, anche se ci sono piccole parti, come vitine e alcuni segmenti, un po' difficili da maneggiare. Però, considerando che era il mio primo tentativo, è andato benissimo. Il personaggio è fedelissimo, davvero ben fatto in tutte le sue parti, forse un po' fragile, ma non è un giocattolo per bambini. Le istruzioni che mi sono arrivate sono in Giapponese, ma i disegni sono così intuitivi che non sono state un problema. Totalmente consigliato.

Ein mehr als nur gelungener Bausatz von bandai. es ist zwar alles auf Japanisch beschrieben, der Zusammenbau ist leicht verständlich, die einzelnen Teile lassen sich gut aus den Gussast heraustrennen und die Modelle lassen viel Spielraum für Diorama-Darstellungen. Kann man nur weiterempfehlen.

Die Teile von diesem Artikel sind sehr genau herausgearbeitet. C-3PO enthält viele kleine Teile , die ich mit einer Pinzette anbringen musste. Einige wenige Kleinteile habe ich geklebt Dabei passierte mir ein kleines Malheur. Ich kam mit meinem "Klebefinger" an ein Bein. Dort ging dann auch schon die Farbe ab( war mein Fehler). Jetzt steht die Figur neben "Darth Vader" und ist ein echter Hingucker :-). Ach ja, es gibt außerdem Auswahlteile (Arme, Brustpanzer und Kopf).Ansonsten: Beste Verarbeitung

I purchased this by mistake, thinking it was the Revotech figure, so I was a bit bummed when I realized that I accidentally ordered a model kit. But I figured since I paid for him, I might as well put him together. The second I opened the box, all feelings of being bummed out disappeared. :) When I saw that he was actually chrome gold instead of a flat gold paint, I was a lot happier. ^_^ So I put him together, and I just him! :)Now, this is a model kit, so naturally you'll need to assemble it yourself. It's a plastic snap together model, so you won't need any screwdrivers or glue. On tool that I would recommend having is a set of pliers to help you get the pieces out. You can do it without pliers, but having pliers makes things easier. He has a few stickers that you need to apply, but they're pretty easy to apply compared to some of the other Star Wars 1/12 models by Bandai that I've seen. He has a lot of pieces, so it may take a while to put him together depending on how much experience you have putting these together. I don't buy model kits very often, so this took me a couple of hours to complete (feel free to laugh). All assembled, this model looks amazing! :) The chrome gold really gives him that authentic golden droid look, and he has some really nice details, too. :)In terms of poseability, he has several points of articulation. His neck is on a ball joint, so he move his head in all directions. His shoulders are also ball joined, so you can rotate his arms around. The arms also swivel, too. :) He has two sets of arms; one set that bends at the elbow, and one set that doesn't. For his hands, they peg into place, so you can rotate them, but that's all the movement you get out of the hands. His torso and hips are connected by two ball joints, so you can rotate and bend the torso some. The torso bends back pretty well, but it doesn't bend too far forward because of part of his torso piece. His legs do swivel, but they don't really bend, so you can't put him in a sitting position. His knees do bend some, but not all the way. As for his feet, they do swivel, but that's about it for his feet.He comes with some different pieces so that you can customize him a bit. He comes with two face pieces; one that's dented, and one that's normal. He also comes two different torso pieces; one that has the restraining bolt on it, and one that doesn't. He also includes two sets of arms; one set that bends at the elbow (this set requires some extra assembly), and one set that doesn't. He also comes with a couple of different sets of hands; one set that's relaxed, and one set posed to hold a comlink. He also includes a comlink, but it's very small, and very easy to lose if you aren't careful. He also includes a dangling eye piece (you know, in the event that your favorite Star Wars memory is his eye hanging from its socket :D). The last thing he comes with is a base for him to stand on. :)All in all, this is a fantastic model, and displays beautifully. :) We haven't gotten word on if Hasbro plans to ever release a 6" Black Series C-3PO figure, but this model kit makes a pretty substitute. :) If you have the time and patience to put him together, then I highly recommend him. :) He just looks fantastic, and makes a great addition to any collection. ^_^

I have not assembled this model yet, so there maybe unforeseen faults, but should there be any problems with construction I will amend review. However the unassembled kit looks beautiful. It comes in a very professional black box with deep gloss graphics, looks really de-lux quality so if giving as a gift doesn't disappoint in presentation. The kit it's self is really finely cast with hardly any flashing and zero deformity; as good if not better than Tamiya kits and far better than anything American. The parts are moulded in coloured plastic appropriate to that parts colour but in this case that doesn't matter to much as C-3 is basically Gold Chrome platted; which is also beautifully done, it's a true metallic mirror finish. One good point is they have done his right leg, bellow the knee, silver chrome which is as per the movie, (C-3P0 is as revelled in episode one made from second-hand parts and who ever finished him, after Anakin left, probably couldn't find a complete gold skin and had to make do with an odd right leg) a feature often overlooked on other models. So there you have it a very good model kit, well made and presented only frustration is the plans and any other text is all in Japanese but that's not to bad as the stage by stage illustrations of build is self explanatory. The plans are basic black and white on the front but when you turn over for the final stages of the build they're glossy full colour. I also notice you get the odd alternate part so you can build C-3 weathered, with retainer bolt on chest and dint in forehead, as per early episode four, or mint fully restored as per the end scene of same movie. All in all I'm very pleased with this model; will I buy others in the range I don't think so. To start with they are a little small for me, at 1/12 scale C-3 is less than 6 inches, that's action figure size, I'm looking to 1/6 scale so after the MPC/ertl kit now; a much cruder model but using this as reference I can refine it. But even if I wanted 1/12 scale I've studied others in the range and feel C-3P0 is the best of the bunch as I've noticed other figures in this range, to make them pose-able, compromises have been made with the limb joints, elbows and knees are hinged, hips and shoulders are ball joins, hidden with costume where possible but often not, Noted human figures have their inner thighs cut away to articulate the legs giving them to wide a space in the crutch and flat inside legs all spoiling the model for articulation making them more action figure than scale model. Fortunately C3 escape such butchery and passes as a very fine display model figure. R2D2 would make a good companion(he come with another droid so as to give you your moneys worth).