Ihr Warenkorb ist leer
Ihr Warenkorb ist leerSV241 Pro verfügt über eine präzise 3-Achsen-Einstellung. Präzise Einstellung der drei Achsen X, Y, Z Es ist kompatibel mit den meisten Handys. Die Z-Achseneinstellung hilft dabei, den richtigen Augenabstand zu erhalten, um die klaren Bilder und Videos von Himmelsobjekten mit Ihrem Smartphone wie nie zuvor aufzunehmen. Diese Handyhalterung kann für Teleskope mit einem Außendurchmesser von 28-48 mm verwendet werden. Der SV214 Pro 3-Achsen-Universal-Smartphone-Adapter ist kompatibel mit fast jeder Marke / Modell von iPhone/Android-Smartphones (Breite 55 mm-105 mm). Hergestellt aus starrer Aluminiumlegierung, verbiegt sich nicht, neigt oder verzieht sich nicht, hält Ihr Handy fest und senkrecht zum Teleskopokular. EVA-Pads am Okularclip und Telefonclip schützen die Ausrüstung vor Verschleiß. 3,2 cm (1,25 Zoll) Handy-Adapter geeignet für 3,25 cm kleine Okulare, 5,1 cm Handy-Adapter für große Okulare. Der Digiskop-Adapter ist kompatibel mit vielen Teleskopen, wie Ferngläsern, Mikroskopen, Monokular-Teleskopen. Stellen Sie den Okularclip und den Handyclip auf die entsprechende Position ein. Sie können diese Handyhalterung für astronomische Beobachtung und Tierbeobachtung verwenden. Spezifikation: Modell: SV214 Pro Okular-Klemmbereich: 28–48 mm, Telefonklemmbereich: 55–105 mm, Feineinstellungsstil: 3-Achsen-Telefonklemmen-Stil: einfache Belastung mit interner Feder. Materialien: Vollmetall. Kompatible Optik: Teleskop, Fernglas, Spektiv und Monokular. Lieferumfang: 1 x SV214 Pro Universal-Smartphone-Adapter; 1 x Handbuch; 1 x Fernbedienung; 1 x Handschlaufe
Hille T.
Bewertet in Deutschland am 2. Mai 2025
Leider ist mein Handy zu groß für diese Halterung.Eine Rücksendung als verfolgbares Paket kostet so viel wie der Warenwert.
Placeholder
Bewertet in den USA am11. Januar 2025
update: the seller (SVBONY Direct) read this review just a few days later and offered a full refund, no questions asked.It will hold a massive Galaxy S24 Ultra with cover on the very limit of its dimensions, but you have to place this phone crooked because the adjustment isn't enough to align the cameras with the center of the mount.the spring of the holder isn't strong enough to keep the phone steady and it rotates and slides on the mount as it only has 2 holders (the 3rd isn't a holder, is just a stopper that can't be adjusted to balance the phone so it wouldn't slide). rubber on the holders is hard and doesn't have any grip on the phone, which would prevent sliding too.all 3 axis adjustment rods have an absurd thread play and the phone always slides out of adjustment because of this play.
Smarta
Bewertet in den USA am1. Januar 2025
It is a wonderful product that meets all the hype. The only challenge I have seen is if you use it on a binocular. You can not get the eyepiece close enough to the camera to come anywhere near filling the view the camera is seeing. However, on a telescope it is not an issue
Alex Grimaldo
Bewertet in Mexiko am 8. Juli 2024
Buen producto,viene bien embalado y llegó a tiempo
Jerry D.
Bewertet in den USA am7. Oktober 2024
I've tried a couple of other smart phone brackets over the years to use for quick shots with my telescopes, but THIS one stands out for its build-quality. It's all machined aluminum alloy and the X, Y and Z axis adjustment screws appear to be stainless steel with machined aluminum knobs. The clamp that holds the smart phone is spring-loaded and there is a "foot" that the bottom edge of the phone rests on, that makes positioning the phone easily repeatable. The eyepiece clamp has a wide adjustment range and there are rubber pads that cushion the eyepiece, to prevent scratching the surfaces of your favorite eyepiece.The included Bluetooth remote shutter trigger pairs easily with iOS and Android devices and allows shooting without touching the phone, which prevents the telescope from vibrating and blurring your shots. It uses a standard CR2032 disc battery which is included.Our recent local weather hasn't allowed much opportunity to actually use it on my scopes yet, but I can already see that it should function as advertised when the damn clouds clear out. Should get a chance tonight if today's forecast holds true. I'll post an update after actually getting to shoot with it. However, my initial impression is very positive.
Bucky Katt
Bewertet in den USA am1. Juli 2024
I have an older 127mm Mak-Cass telescope that I am getting kitted-out for stargazing and, hopefully taking pics. The weather, where I live, has been problematic for me to properly try this adapter, from Svbony, out. But this afternoon, although windy, was not brutally hot so I thought I would give it a try.I've been happy with the products that I've purchased from Svbony, and this is no exception. It is large, made of aluminum alloy (yet has some weight to it), and is machined well for smooth adjustment. It also comes with a Bluetooth remote shutter release (compatible with both IOS and Android). The latter I have paired with my Android phone (Pixel 5A). The adapter and remote come with instructions that are clear and quite helpful.I attached it to my scope (see pic) and it is a bit tricky to adjust. However, it soon becomes fairly easy to do (once you do it a couple of times. Depending upon your telescope, you may need to shift its balance / center of gravity a bit to compensate for the weight of the adapter. After getting everything zeroed-in, I focused on the top of the mountain peak in the distance (red arrow in pic). The last pic is from using my phone on the adapter, with the remote shutter release. Even though it is hazy (wind / atmosphere disturbance), I think it doesn't look bad at all. I think with a clear night, that isn't cloudy/rainy/windy/hot/humid (rare this time of year in East TN it seems), this would help me take some interesting pics of the night sky.The remote worked smoothly, and paired easily with my phone.I really quite happy with this smartphone adapter for my telescope. I think the price is quite fair for the quality of the item.
Produktempfehlungen
