Tut was es soll.Trotz des günstigen Preises,sehr gut verarbeitet.

Wenn man mit Forscan arbeitet, ist das Teil echt ein Traum. Man muss aber manchmal mit den Treibern kämpfen, vorallem am Anfang bei der Installation, daher 1 Stern abzug.

Funktioniert optimal. Wird in Verbindung mit dem Forscan genutzt.

Didn’t need to download new drivers etc was as simple as out the box, connect to forscan then connect to the van. As easy as that no complaints!!

I've successfully enabled hill start assist on my Ford C-Max 2013 titanium - as it didn't come with it from the factory.It's very easy to use the device to change settings or view data. Highly reccomended.

Goed, snel stuk en werkt snel

works good. Ford Mondeo mk5 2016

Perfekter OBD Steckerz funktioniert alles und man muss nicht mehr umschalten wie bei den billig Dingern. Klappt super mit forscan.

It works

Funktioniert zu 100% mit Forscan.Konnte damit problemlos diverse Einstellungen bei meinem 2019er Ford Kuga ändern.Zb nachträglich eingebaute Rückfahrkamera freischalten oder Door-Autolock aktivieren etc.Absolute Empfehlung!

i bought this OBD2 adapter to change some settings on my Mustang and my Fiesta using ForScan software. Works as expected. I was able to disable the TPMS warnings on my Fiesta caused by expired TMPS sensors.... i am old school and check tire pressure regularly. And since the low tire pressure warning on both of my Fords kick in at around 25 psi, pressure is already too low and TPMS will not be missed. I was also able to enable steering wheel audio controls in my Mustang after swapping my Base model plastic wheel for a GT500 leather and alcantara wheel. In all, this is a great tool that works great with ForScan

Adquirí este producto para detectar fallas que regularmente no aparecen en un escáner económico. De inmediato detectó algunas fallas que están programadas para no encenderse en el tablero, por lo que el análisis con este conector fue de gran ayuda. Es necesario tener la versión extendida de FORScan, que tampoco es muy cara, para llevar acabo un escaneo integral. En cuanto a modificaciones, preferí no alterar nada a la configuración de fábrica del vehículo, por lo que en ese tema no puedo opinar nada. Satisfecho con mi compra. El único pero que le encontré es que quedó ligeramente holgado en la conexión usb, por lo que debo tener cuidado de que no se desconecte mientras llevo a cabo el escaneo.

If you use FORScan or intend to use FORScan, this is the connector to have. This is the least expensive of the recommended connectors, but I can't yet figure out why. But let's get into my experience with is thus far. It arrived earlier than initially estimated which is a good thing. In the box was the connector and a bi-fold user manual labelled as "Getting Started". My first reaction of this document is that what should have been the front, was at the back, and what should have been at the back, at the front. Odd, but easily overlooked. The connector itself looks very well put together and has some amount of style to it. It's not just a brick with lights and a wire coming out of it. It's somewhat ergonomic and the plastic seems to be of good quality non-shiny material. Like I said, no idea why it's the cheapest.One thing I will say is that this is not plug-and-play. It requires you to download and install a driver from a website, which the manual does a good job of directing you to. This is where things got a little confusing because the manual doesn't tell you specifically which driver to install, except to say "Please select the driver according to your computer system." On the website where you download the driver, a table populated with different links for different systems had a row for Windows, and a column for 32-bit and 64-bit. I installed it on a Windows 10 64-bit machine, so I clicked on the link for that driver. It was actually a zipped file. That's fine if I wanted to manually install the various bits and pieces. Pass on that. The actual executable (.exe) file that does everything automatically, was all the way over in the "Comments" column, labelled as "setup executable". I clicked on that and the prompt to download the .exe file popped up and so on. When it was finished, I ran the file and everything installed without a hitch. Now that I think about it, perhaps this is why it's the cheapest. It's not plug-and-play.If you haven't already installed FORScan you can do so. See their website for your download options.After you've done that just plug the connector into the laptop and then run FORScan. The manual for the connector says to connect it to the car before you open FORScan, but doing that resulted in an error and FORScan closing. I recommend you connect it to the OBDII port after FORSCan has already opened.This connector works seamlessly with FORScan and allows high speed (HS) CAN bus and medium speed (MS) CAN bus modules to be read simultaneously because it switches back and forth automatically. Highly recommended!