Ihr Warenkorb ist leer
Ihr Warenkorb ist leer
Im Vergleich zu gewöhnlichen Schleifscheiben eignen sich unsere CBN-Schleifscheiben besser zum Messerschärfen.
1. Die Härte der CBN-Schleifscheibe ist hoch genug
2. CBN-Material reagiert bei hohen Temperaturen nicht chemisch mit Metall und hat daher eine längere Lebensdauer
3. Das Design mit abgerundeten Ecken ermöglicht Ihnen ein breiteres Anwendungsspektrum, wie z. B. Bogenwerkzeugep>
Anwendbare Modelle: T7, T8
Details
Material: CBN
Größe: Durchmesser 250 mm, Höhe 50 mm, Innenlochdurchmesser 12 mm
Gewicht: 4,6 kg
Partikelgröße: 80 Mesh; 160 Mesh; 400 Mesh; 1000 Mesh
Kombinationsmethode: Galvanisieren
Anwendung: Metall, Keramik, verschiedene Hartmetalle
Dies ist eine spezielle Schleifscheibe speziell für T7/T8. Und es wurden Verbesserungen bei Material und Verarbeitung vorgenommen. Wenn Sie einen T7- oder T8-Nassschleifer haben, ist dies definitiv die Scheibe, die Sie brauchen. Nach der Verwendung werden Sie sich in diese Schleifscheibe verlieben und sie wird die meisten Schleifscheiben definitiv übertreffen.
Kunde
Bewertet in Deutschland am 5. März 2025
Super
Paul Challice
Bewertet in Großbritannien am 5. März 2025
Superb quality. Fits my Tormek T8, runs true, even coating of abrasive, cuts effectively. Delighted with this purchase. I bought 1000 grit which produces a nice sharp edge while still removing metal fast enough. The Tormek extra fine diamond wheel is 600 grit, I had one before this, I prefer the 1000 grit as it’s noticeably finer and better at sharpening blades. Also the curved edge is useful.
Abc
Bewertet in den USA am16. Januar 2025
Nice grinding wheel that accurately fits my Tormek knockoff slow grinder.Note that large grains need knocked off before serious us. Run the wheel on an old file to knockoff the big chunk. Keep in mind that they recommend having the wheel rotate away from an edge due to the CB crystals.
HM
Bewertet in Deutschland am 11. Februar 2025
Grob...aber dann wird sie feiner
David B. B.
Bewertet in Kanada am 21. August 2024
Die Medien konnten nicht geladen werden.
Peter V
Bewertet in Schweden am 10. November 2023
Bra Sten, har köpt en dyrare från ett tyskt företag. Ingen skillnad på stenarna. Passar min Tormek T8 perfekt.
alan gwinner
Bewertet in den USA am1. Februar 2023
The ad copy is correct, CBN is great for knives, and I love it! I am a pro sharpener, now in my second year.I've been hearing about CBN wheels since I started, and it was all good that I read, but they are expensive and hard to get ones that are for the low RPM wet grinders like my Tormek and others. I am leery of buying direct from sellers outside the US, buying for business use isn't the same as consumer purchasing, even with legit sellers it's riskier. Buying something like this through Amazon offers good protection if it turns out to be junk. So, I went for it.And I couldn't be happier!! I bought the 400 and 1000, three days in use so far. Now my work is significantly faster, and better. For the first time I'm getting knives routinely down to Gilette razor blade sharp, and sometimes even sharper! That's around 50 BESS test. I got down to 24 and 30 with my two Japanese high carbon knives, for the first time ever. I was shocked, honestly. The bevels are nice and clean, too, even and good looking. Today I ordered the 80 grit to do profile shaping and regrinding of very dull or damaged knives.Up until now I've been using stone grinding wheels by Tormek. (I sharpened well over 1000 pieces in my first part-time year of business.) They go out of true quickly, and make a muddy mess. They are fine for low volume use, and less expensive than CBN or diamond, but not by a lot in my opinion. Personally, I couldn't get knives as sharp as I do now with CBN, and definitely not as fast. I got them sharp enough to easily satisfy my customers, always sharper than original factory sharp. I am now another level better than that!My only caution is that this is only my first few hours on them, I can't speak to their longevity. I doubt there will be any issues long term, if there are I'll post another review.-Alan
Produktempfehlungen
